|
|
| You can now have 26" of external clamping performance without the
need for clumsy adapter or cumbersome table-top adjustments.
The fastest and most trouble-free way to service low
profiles, run-flats and high performance alloy wheels.
This model was designed with operators in mind. It reduces
fatigue and allows technicians to work more efficiently.
It is perfect for high volume tire shops that service
large, low-profile tires.
The Easiest Way to Change Low Profiles, Run Flats
and Alloy Wheels. The Model R26EX is designed to take
on the widest wheels and the most stubborn to change
tires. It's ideal for the high volume shop where large,
low profile tires are a growing part of the business.
The Model R26EX features an exclusive Dual Pneumatic
Power Assistants capable of flexing even the stiffest
sidewalls and a Power Taper Roller to allow easy bead
lubrication and mounting. A special Total Rim Protection
Package protects even the most delicate wheels through
the entire process. |
- 26" Outside Clamping
- Dual-Setting Bead Breaker
- Dual Power Assistants
- Powerful High-Torque Motor
- Dual Lower Bead Helper Disks
- Powerful "Jet-Blast" Bead Sealer
|
- Power-Assist Bead Roller
- Bead Hold Down Device
- Tilt-Back Tower
- Inflation Restraint Device
- Large Storage Trays
- Oversize Lube Bucket Storage
|
Specifications
| Type of Drive System |
Electric & Air |
| Motor - Two Speed |
1-1/2 HP (110-220 VAC) |
| Air Requirement |
110-175 PSI (8-10 bar) |
| Wheel Clamping Method |
4 Clamps Internal/External |
| Table Clamping System |
Dual Pneumatic Cylinders |
| Bead Breaking System |
Pneumatic Powered Blade |
| Air-Lock Mounting Tool Holder |
Standard |
| Inflation Gauge |
Standard |
| Water Filter |
Standard |
| Oiler/Lubricator |
Standard |
| Air Regulator |
Standard |
| Breaker Bar |
Standard |
| Soap/Lubricator Bucket |
Standard |
| Brush |
Standard |
| Tilt-Back Tower |
Standard |
| Lower Bead Lifting Roller |
Dual / Left & Right |
| Upper Bead Assist Roller |
Standard |
| Traveling Drop-Center Hold Down Device |
Standard |
| Inflation Restraint Device |
Standard |
| Powerful "Jet-Blast" Bead Seating System
|
Standard |
| Internal Rim Clamping Capacity |
14-1/2" - 28" (368 mm - 711
mm) |
| External Rim Clamping Capacity |
12-1/2" - 26" (315 mm - 660
mm) |
| Bead Breaker Capacity |
3" - 15" (76 mm - 381 mm) |
| Tire Width Capacity / Table |
5" - 22" (127 mm - 559 mm) |
| Max. Tire Diameter |
47" (1270 mm) |
Back to Top
| The RX850 tire changer by Ranger is a dramatic improvement over yesterday's
machines, delivering true performance, unparalleled
control, and increased efficiency. The RX850 is truly
a "no compromise package", with state of the
art features that help increase your service capability,
customer satisfaction, and best of all, profits. Rim-clamping
and bead-breaking operations are precise assuring that
even today's expensive alloy wheels are undamaged. The
fully adjustable tool bar can be set for both vertical
both vertical and horizontal planes and the improved
stainless steel mount/demount head allows you to perform
all changing functions in the same position. Top it
off with a 1-1/2 H.P. motor, a geometric table design
that allows you to inspect the underside of the wheel
and a high volume "Jet-Blast" system for bead
seating and you've got a full-system tire and wheel
service center to fulfill all your needs. Especially
your business needs. |
Features & Specifications
| Type of Wheels |
Aluminum, Special Alloys,
Steel |
| Type of Drive System |
Electric & Air |
| Motor |
1-1/2 HP (110-220 VAC) |
| Air Requirement |
110-175 PSI (8-10 bar) |
| Wheel Clamping Method |
4 Clamps Internal/External |
| Table Clamping System |
Dual Pneumatic Cylinders |
| Bead Breaking System |
Pneumatic Powered Blade |
| Inflation Gauge |
Standard |
| Water Filter |
Standard |
| Oiler/Lubricator |
Standard |
| Air Regulator |
Standard |
| Breaker Bar |
Standard |
| Soap/Lubricator Bucket |
Standard |
| Brush |
Standard |
| Cross Cut Table Top |
Standard |
| Adjustable Jet-Blast Bead Seating |
Standard |
| Internal Rim Clamping Capacity |
12" - 20" (304 mm - 508 mm)
|
| External Rim Clamping Capacity |
11" - 18" (279 mm - 457 mm)
|
| Tire Width Capacity / Bead Breaking |
11.5" (292 mm) |
| Tire Width Capacity / Table |
12.5 (317 mm) |
| Max. Tire Diameter |
36" (914 mm) |
| Shipping Weight |
465 lbs. (211 Kg) |
Back to Top
Features
& Specifications
| Type of Wheels |
Aluminum, Special Alloys,
Steel |
| Type of Drive System |
Electric & Air |
| Motor |
1-1/2 HP (110-220 VAC) |
| Air Requirement |
110-175 PSI (8-10 bar) |
| Wheel Clamping Method |
4 Clamps Internal/External |
| Table Clamping System |
Dual Pneumatic Cylinders |
| Bead Breaking System |
Dual Positional Pneumatic Blade |
| Inflation Gauge |
Standard |
| Water Filter |
Standard |
| Oiler/Lubricator |
Standard |
| Air Regulator |
Standard |
| Breaker Bar |
Standard |
| Soap/Lubricator Bucket |
Standard |
| Brush |
Standard |
| Cross Cut Table Top |
Standard |
| Powerful Jet-Blast Bead Seating |
Standard |
| Internal Rim Clamping Capacity |
12 1/2" - 22" (317 mm - 559
mm) |
| External Rim Clamping Capacity |
11 1/2" - 21" (292 mm - 533
mm) |
| Bead Breaker Capacity |
3" - 14" (76 mm - 355 mm)
|
| Tire Width Capacity / Table |
14" (317 mm) |
| Max. Tire Diameter |
50" (1270 mm) |
| Shipping Weight |
642 lbs. (291 Kg) |
Back to Top
|
|
