|
|
| Reliability and performance confirmed by thousands
of professionals around the world, adaptability to all
types of wheel and requirement, even the most demanding
--these are the reasons for the extraordinary popularity
of the A2019, the market standard and the most sold
model in the entire Corghi range. Operation is automatic,
with pneumatic column tilting and 20" turntable,
and it is ideal for mounting/de-mounting car, van and
motorcycle tires. The pneumatic tilting column combined
with the 665 mm height of the turntable give maximum
ease and speed of use during mounting/de-mounting. The
standard head is designed to protect even the lightest
rims, using interchangeable plastic components for the
inner surfaces contacting the rim during tire mounting/de-mounting.
Furthermore, to protect the rim, plastic guards are
standard supply for all parts which could damage the
rim during tire changing, such as the turntable clamps,
the bead breaker shoe and bead lifting lever. Components
such as higher profile clamps and interchangeable clamping
zones, bear witness to the attention paid to ergonomics,
safety and operating costs. The bead breaking unit is
equipped with a two-position telescopic wheel pad (CORGHI
patent) for breaking the bead on all wheels up to 14"
wide. |
- Automatic tire changer with pneumatic tilting
column and 20" turntable
- Higher profile clamps for better interior/exterior
wheel clamping
- Clamps completely protected inside and out with
plastic protectors to avoid damaging light rims
- Telescopic horizontal arm for rapid head positioning
to the rim
- Column with interchangeable plastic parts for
rim protection
- Standard supply plastic protectors for the bead
breaker shoe and bead lifting lever
- Complete with lubrication filter and pressure
regulator
- Standard supply plastic protectors for the bead
breaker shoe and bead lifting lever
- One person can change high performance tires without
using pry-bars and without damage to the wheel or
tire assembly
|
- Includes the SP2000 Super Power Unit
- Sliding pads with interchangeable clamping zones
- Turntable with double pneumatic cylinder for secure
clamping of all rim types
- Pneumatic tilting arm support column featuring
high torsional rigidity in all operating positions
- Telescopic horizontal arm for rapid head positioning
to the rim
- Bead breaker with stainless steel pneumatic cylinder
- Telescopic two-position bead breaker pad (CORGHI
patent) for breaking the bead on wheels up to 14"
wide
- Designed to service run-flat, EMT and high performance
tires
- Pneumatic locking mount/de-mount head
- Dual air powered cylinders (re-buildable)
- Safe-fast-profitable-affordable
|
Specifications |
| Turntable |
| Inside Clamping Capacity |
13" - 22" |
| Outside Clamping Capacity |
11" - 20" |
| Max. Tire Diameter |
37" |
| Max. Tire Width |
14" |
| n° Clamps |
4 |
| n° Cylinders |
2 |
| Rotational Torque |
1200 Nm |
| Rotational Speed |
8 rpm |
| Height |
26" |
| Rim Width |
3.5" - 14" |
| Bead Breaker |
| Max. Opening |
15" |
| Shoe Pressure |
15500 N |
| Pad |
Telescopic |
| Power |
3500 lbs. |
| Tool |
| Working Range |
10" - 22" |
| Column |
Pneumatic Tilting |
| Head Locking |
Pneumatic |
| Power Supply |
| Electric 3-phase |
230/400 V – 0.75 kW |
| Electric 1-phase |
110/230 V – 0.75 kW |
| |
|
| Air Pressure |
150 PSI |
| Weight |
514.8 lbs. |
SP2000 Super Power Unit
- Included with the A2019TI-20
- Pneumatic powered upper disc, holds bead into
the wheel drop for mounting.
- Designed for low profile, EMT and High Performance
tires and wheels.
- Loosening upper bead for de-mounting.
- Push down upper bead for lubrication and tire
tool insertion.
- Lowering upper bead for inspection between bead
and
de-mount head.
- Lowering upper bead for inserting the bead clamp,
this clamp
makes it possible to lift the bead over the mount/de-mount
head.
- Pneumatic powered lower lifting arm holds lower
bead into
wheel drop while lower bead is lifted over mount/de-mount
head.
- Pneumatic powered lower lifting arm re-loosens
lower bead if
it re-seats.
|
Back to Top
| Reliability and performance confirmed by thousands
of professionals around the world, adaptability to all
types of wheel and requirement, even the most demanding
--these are the reasons for the extraordinary popularity
of the A2019, the market standard and the most sold
model in the entire Corghi range. Operation is automatic,
with pneumatic column tilting and 20" turntable,
and it is ideal for mounting/de-mounting car, van and
motorcycle tires. The pneumatic tilting column combined
with the 665 mm height of the turntable give maximum
ease and speed of use during mounting/de-mounting. The
standard head is designed to protect even the lightest
rims, using interchangeable plastic components for the
inner surfaces contacting the rim during tire mounting/de-mounting.
Furthermore, to protect the rim, plastic guards are
standard supply for all parts which could damage the
rim during tire changing, such as the turntable clamps,
the bead breaker shoe and bead lifting lever. Components
such as higher profile clamps and interchangeable clamping
zones, bear witness to the attention paid to ergonomics,
safety and operating costs. The bead breaking unit is
equipped with a two-position telescopic wheel pad (CORGHI
patent) for breaking the bead on all wheels up to 14"
wide. |
- Automatic tire changer with pneumatic tilting
column and 20" turntable
- Turntable with double pneumatic cylinder for secure
clamping of all rim types
- Pneumatic tilting arm support column featuring
high torsional rigidity in all operating positions
- Column with interchangeable plastic parts for
rim protection
- Standard supply plastic protectors for the bead
breaker shoe and bead lifting lever
- Complete with lubrication filter and pressure
regulator
- Standard supply plastic protectors for the bead
breaker shoe and bead lifting lever
- One person can change high performance tires without
using pry-bars and without damage to the wheel or
tire assembly
|
- Sliding pads with interchangeable clamping zones
- Higher profile clamps for better interior/exterior
wheel clamping
- Clamps completely protected inside and out with
plastic protectors to avoid damaging light rims
- Telescopic horizontal arm for rapid head positioning
to the rim
- Bead breaker with stainless steel pneumatic cylinder
- Telescopic two-position bead breaker pad (CORGHI
patent) for breaking the bead on wheels up to 14"
wide
- Designed to service run-flat, EMT and high performance
tires
- Pneumatic locking mount/de-mount head
- Dual air powered cylinders (re-buildable)
- Safe-fast-profitable-affordable
|
Specifications |
| Turntable |
| Inside Clamping Capacity |
13" - 23" |
| Outside Clamping Capacity |
10" - 20" |
| Max. Tire Diameter |
37" |
| Max. Tire Width |
14" |
| n° Clamps |
4 |
| n° Cylinders |
2 |
| Rotational Torque |
1200 Nm |
| Rotational Speed |
8 rpm |
| Height |
26" |
| Rim Width |
3.5" - 14" |
| Bead Breaker |
| Max. Opening |
15" |
| Shoe Pressure |
15500 N |
| Pad |
Telescopic |
| Power |
3500 lbs. |
| Tool |
| Working Range |
10" - 22" |
| Column |
Pneumatic Tilting |
| Head Locking |
Pneumatic |
| Power Supply |
| Electric 3-phase |
230/400 V – 0.75 kW |
| Electric 1-phase |
110/230 V – 0.75 kW |
| |
|
| Air Pressure |
150 PSI |
| Weight |
514.8 lbs. |
Optional SP2000 Super Power Unit
- Included with the A2019TI-20, Optional with the
A2019TI
- Pneumatic powered upper disc, holds bead into
the wheel drop for mounting.
- Designed for low profile, EMT and High Performance
tires and wheels.
- Loosening upper bead for de-mounting.
- Push down upper bead for lubrication and tire
tool insertion.
- Lowering upper bead for inspection between bead
and
de-mount head.
- Lowering upper bead for inserting the bead clamp,
this clamp
makes it possible to lift the bead over the mount/de-mount
head.
- Pneumatic powered lower lifting arm holds lower
bead into
wheel drop while lower bead is lifted over mount/de-mount
head.
- Pneumatic powered lower lifting arm re-loosens
lower bead if
it re-seats.
|
Back to Top
| Are you looking for a tire changer to fit everybody's
budget? The A9212TI is perhaps the world's most economical
and reliable tire changer.
Perfect Economy Choice - complete with all of the functions
and features you need! |
- Built-in table top inflator with jets in the jaws
- Convenient locking handle: locks head automatically
away from rim
- Powerful action bead-breaker blade: follows bead
to inside rim contour for positive bead breaking
- Heavy duty turntable. Rotates in either direction.
- Stainless Steel Cylinder
- Cylinder (re-buildable)
- Forward and reverse turntable
- 5 yr limited warranty on transmission
|
- Unique mount/de-mount head, Does not touch rim
during mount/de-mount operation
- Upper arm assembly swings out-of-way for operator
convenience
- Wheel chucks: four contact points for powerful,
yet gentle chucking of rim
- Vertical column (doubles as air tank)
- Inflator gauge
- Built-in tabletop inflators
- Bead clamp
- Plastic tire iron cover
- 1 year parts and labor
|
Specifications
| Voltage |
110 Volts 1 Phase |
| Air Pressure |
150 PSI |
| Max. Tire Diameter |
37" |
| Rim Clamping External |
10" - 18" |
| Rim Clamping Internal |
13" - 21" |
| W/ATV ada |
8" |
| Rim Width |
3.5" - 12.5" |
| Bead Breaking |
3100 lbs. |
| Rotational Torque |
650 ft. lbs. |
| Weight |
480 lbs. |
Back to Top
| Superior quality, sleek design, and unique features
allow this machine to achieve speeds up to 50 percent
faster than any other machine on the market in, this
price range. |
- Built-in table top inflator with jets in the jaws
- Convenient locking handle: locks head automatically
away from rim
- Powerful action bead-breaker blade: follows bead
to inside rim contour for positive bead breaking
- Heavy duty turntable. Rotates in either direction.
|
- Unique mount/de-mount head, Does not touch rim
during mount/de-mount operation
- Powerful bead pressing lever
- Upper arm swings out of the way
- Plastic jaw cover is standard
- Plastic inserts are standard
- Tool iron cover is standard
- Stainless steel cylinders
|
Specifications
| Inside Clamping Capacity |
13" - 22" |
| Outside Clamping Capacity |
11" - 20" |
| Max. Tire Diameter |
50" |
| Rotational Torque |
750 ft/lbs. |
| Rim Width |
3.5" - 15" |
| Bead Breaking |
3500 lbs. |
| Air pressure |
150 PSI |
| Weight |
560 lbs. |
Back to Top
| The AG SUPER 52 L is the outcome of Corghi’s
years of experience of the heavy tire changer sector,
combining exceptional performance with excellent value
for money: which explains why it is the best selling
model in our range.This automatic tire changer is ideal
for truck, coach, agricultural and earth moving equipment
tires. Operation is electro-hydraulic and the controls
are mounted on a low voltage mobile unit.The two-speed,
bi-directional hydraulic turntable features the best
design and materials and ensures optimal wheel locking
during clamping, bead breaking and tire de-mounting.
The tool arm moves along the base to facilitate tool
positioning during operation.The tool mount, in nodular
cast iron, is equipped with an overhanging bead breaker
disk on tapered roller bearings for long life and smooth
running. The special disk shape has been designed for
optimal penetration between the edge of the rim and
the bead; the outer hemispherical profile is designed
to avoid damaging the tire The tool used is fully tested
and has an effective protective coating. |
- Automatic tire changer for commercial vehicles,
trucks and coaches, and wheels with rim rings
- Machined steel tool arm
- Equipped with hydraulic pressure gauge
|
- Electro-hydraulic operation
- Mobile control unit separate from the machine
- Wheel clamping with two-speed bi-directional hydraulic
turntable
- Manual tool rotation
|
Specifications
| Clamping System |
Hydraulic Turntable |
| Rotation Motor |
1.3/1.85 kW |
| First Rotation Speed |
4 rpm |
| Second Rotation Speed |
8 rpm. |
| First Rotation Speed Torque |
4120 Nm |
| Second Rotation Speed Torque |
2943 Nm |
| Clamping Part |
4 Clamps |
| Clamping Capacity |
11" - 52" |
| Max. Clamping Force |
42000 bar |
| Max. Hydraulic Pressure |
100 bar |
| Max. Tire Diameter |
87" |
| Max. Tire Width |
39" |
| Max. Wheel Weight |
1760 lbs. |
| Min. Wheel Center Diameter |
5" |
| Min. Working Height at Spindle Shaft |
15" |
| Power Supply |
Electric 3-ph 230/400 V |
| Weight |
1881 lbs |
Back to Top
| Corghi's flagship product, ARTIGLIO BASIC is the most
automated unit on the market; equipped with simple,
functional controls, it reduces operator fatigue and
meets the requirements of professional wheel mechanics.
Operation is fully automatic, with pneumatic tilting
column and 20" turntable, and it is ideal for mounting/de-mounting
car, van and motorcycle tires. The pneumatic tilting
column combined with the 665 mm height of the turntable
give maximum ease and speed of use during mounting/de-mounting.
To ensure ergonomics and speed with every type of wheel,
the turntable automatically tilts downwards for easier
loading of the wheel onto the turntable and is equipped
with a two-speed motor. The standard head is designed
to protect even the lightest rims, using interchangeable
plastic components for the inner surfaces contacting
the rim during tire mounting/de-mounting. Furthermore,
to protect the rim, plastic guards are standard supply
for all parts which could damage the rim during tire
changing, such as the turntable jaws, the bead breaker
shoe and bead lifter lever. Components, such as higher
profile clamps and interchangeable clamping zones, bear
witness to the attention paid to ergonomics, safety
and operating costs. The bead breaking unit is equipped
with a two-position telescopic wheel pad (CORGHI patent)
for breaking the bead on all wheels up to 14" wide
and the bead breaker arm is of the "short stroke"
type for quicker bead breaking. |
- Offers benchmark performance, especially in the
EMT Run-Flat and High performance market
- This unit can handle all types of passenger cars
and light trucks up to 14" width rims
- The wheel clamping device is developed from CORGHI's
patented system with four sliding clamps
- The reliability and long-life of the machine are
enhanced by the adoption of extremely rugged construction
throughout
- Clamps completely protected inside and out with
plastic protectors to avoid damaging light rims
- Head with interchangeable plastic parts for rim
protection
|
- Excels in stability, versatility, ease of maintenance,
speed of operation and lasting reliability
- The tabletop pivots to a near-vertical position
for effortless loading and off-loading of heavy
wheel and tire assembly
- The bead breaking system has been re-engineered
so it can be activated in any position, thus eliminating
the risk of damage to bead and rim
- Pneumatic tilting turntable for loading wheels
up to 154 lbs.
- Pneumatic tilting arm support column featuring
high torsional rigidity in all operating positions
- Complete with lubrication filter and pressure
regulator
|
Specifications
| Turntable |
| Inside Clamping Capacity |
13" - 22" |
| Outside Clamping Capacity |
11" - 20" |
| Max. Tire Diameter |
37" |
| Max. Tire Width |
14" |
| Rotational Torque |
737 ft/lbs. |
| Rotational Speed |
6 - 18 rpm |
| Rim Width |
3.5" - 14" |
| Bead Breaker |
| Max. Opening |
15" |
| Shoe Pressure |
15500 N |
| Pad |
Telescopic |
| Power |
3500 lbs. |
| Power Supply |
| Electric 1-Phase |
110 Volts 1 Phase |
| |
|
| Air Pressure |
150 PSI |
| Weight |
900 lbs |
Back to Top
| Artiglio Master is designed to mark a new frontier
in the world of tire changers. Probably only Corghi
could have developed a product capable of superseding
the traditional tire changer, invented in the Fifties
and even today the characteristic product of a brand
and an entire sector of professional users.
Artiglio Master marks the end of the lever, of physical
effort, precautions and worry for light rims, dangerous
stresses on the tire itself and the problems associated
with the continual development of new types of rim.
The units extreme ease of use enables anyone to mount,
de-mount and break the bead of any type of tire from
10 to 24". The unit’s operation is based
in a completely new principle: electronic wheel diameter
selection with automatic tool positioning, wheel lifter
for loading and unloading the wheel in the optimal position,
bead breaker with controlled penetration and automatic
actuation, automatic tool head for leverless wheel mounting/de-mounting;
all this without the need for the operator to leave
his station, since all controls are mounted in a single
ergonomic console for completely safe operation. The
result: speed, precision and safety.
|
- Integrated PAX system
- Axial mounting turntable with automatic locking
(Patent Application Pending)
- Pneumatic bead breaking unit with double vertical
bi-directional disk with automatically controlled
penetration (Patent Application Pending)
- Pneumatic wheel lifter for loading and unloading
the wheel in the optimal position (Patent Application
Pending)
- Available with traditional pedal-controlled inflation
or with integrated T.I. bead seating/inflation system
|
- Universal tire changer for all vehicle wheels
to 24"
- Electronic wheel diameter selection with automatic
mounting/de-mounting tool and bead breaker disk
positioning (Patent Application Pending)
- Mounting/de-mounting tool head with vertical bi-directional
motion controlled from the console, for optimal
tire mounting/de-mounting without the use of the
bead lifter lever (Patent Application Pending)
- Pneumatic support unit with automatic positioning
for supporting the tire during de-mounting
|
Specifications
| Technical Data |
| Range of Wheel Sizes |
| Max. Tire Diameter |
40" |
| Max. Keying Diameter |
14" |
| Tires |
Conventional & PAX system |
| Turntable |
| Centering on Cone |
| Clamping Automatic |
| Pad |
Flanged |
| Rotational Torque |
1000Nm |
| Rotational Speed |
6 - 18 rpm |
| Positioning Relative to Tools |
Automatic |
| Bead Breaker |
| Tool |
Disk |
| Positioning Relative to Rim |
Automatic |
| Penetration |
Guided |
| Lower Breaker Stroke |
18" |
| Upper Breaker Stroke |
16" |
| Lower Breaker Pressure |
7600 N |
| Upper Breaker Pressure |
7600 N |
| Power Supply |
| Electric 1-Phase |
110 Volts 1 Phase |
| Electric 1-Phase (alternative) |
110 Volts 0.55 kW |
| Pneumatic |
8 (min) bar |
| Mounting/De-Mounting
Tool |
| Positioning Relative to Rim |
Automatic |
| Tool Change |
Automatic |
| De-mounting |
Automatic |
| Mounting |
Automatic |
| Wheel Loading/Unloading |
| Operation |
Automatic |
| Power |
Pneumatic |
| |
|
| Weight |
772 lbs |
| Changing Tires is as Easy as 1-2-3!
1. Simply roll the wheel assembly onto the lift cage.
|
2. Press a button to lift the wheel assembly onto the center-post. |
3. Press a button to automatically lock the wheel assembly in place. |
Back to Top
| With the HD 1200 Corghi has further developed the
high performance, reliability and safety which, together
with technological innovation and high quality, are
the hallmarks of its products and have made us the world
leader in this sector.The technical solutions and quality
of the materials used are the strengths of this machine,
which amply meets the demands made upon it, even in
the most heavy duty applications, offering excellent
value for money.This automatic tire changer is ideal
for truck, coach, agricultural and earth moving equipment
tires. Operation is electro-hydraulic and the controls
are mounted on a low voltage mobile unit.The hydraulic
power pack is separate from the machine to enable flexible
installation in terms of the available space. The flexible
coupling combined with the two hydraulic immersion pumps
ensure quiet operation.The two-speed, bi-directional
hydraulic turntable features the best design and materials
and ensures optimal wheel locking during clamping, bead
breaking and tire de-mounting. The high torque facilitates
handling even the most difficult tires.The tool arm
has two locking positions for working even with the
widest tires, and has synchronized, opposed motion relative
to that of the spindle carriage for higher working speed.The
tool mount, in nodular cast iron, is equipped with an
overhanging bead breaker disk on tapered roller bearings
for long life and smooth running. The special disk shape
has been designed for optimal penetration between the
edge of the rim and the bead; the outer hemispherical
profile is designed to avoid damaging the tire. The
tool used is fully tested and has an effective protective
coating. |
- Automatic tire changer for drop center wheels
and tubeless tires for commercial vehicles, trucks
and coaches, and wheels with rim rings
- Overhanging bead breaker disk mounted on tapered
roller bearings
- Machined steel tool arm
- Equipped with hydraulic pressure gauge
|
- Electro-hydraulic operation
- Mobile control unit separate from the machine
- Two-position locking tool arm
- Stroke synchronization between the tool arm and
the spindle carriage
- Wheel clamping with two-speed bi-directional hydraulic
turntable
- Manual tool rotation
|
Specifications
| Clamping System |
Hydraulic Turntable |
| Rotation Motor |
Hydraulic |
| Rotation Speed |
0 - 8.5 rpm |
| Rotation Speed Torque |
4414 Nm |
| Clamping Part |
4 Clamps |
| Clamping Capacity |
11" - 56" |
| Max. Clamping Force |
59200 N |
| Max. Hydraulic Pressure |
140 bar |
| Max. Tire Diameter |
98" |
| Max. Tire Width |
48" |
| Max. Wheel Weight |
2640 lbs. |
| Min. Wheel Center Diameter |
5" |
| Min. Working Height @ Spindle Shaft |
15" |
| Power Supply |
Electric 3-Ph 230/400V |
| Weight |
2552 lbs. |
| Noise Level |
< 70 dba |
Back to Top
- Semi-automatic tire changer for truck, coach and
road vehicle wheels
- Mechanical wheel clamping
- Machined steel tool arm
- Fork-lift truck guides in machine base
|
- Small size relative to its high performance
- Electro-pneumatic operation
- Mobile control unit separate from the machine
- Manual locking tool arm
- Manual tool arm rotation
|
Specifications
| Clamping System |
Mechanical |
| Rotation Motor |
1.15 kW |
| Rotation Speed |
7 rpm |
| Rotation Speed Torque |
1750 Nm |
| Clamping Part |
2 Flanges |
| Clamping Capacity |
17.5" - 25" |
| Max. Tire Diameter |
49" |
| Max. Tire Width |
20" |
| Max. Wheel Weight |
396 lbs. |
| Min. Wheel Center Diameter |
6" |
| Min. Working Height @ Spindle Shaft |
9" |
| Power Supply |
Electric 3-Ph 230/400V |
| Weight |
770 lbs. |
| Noise Level |
< 70 dba |
Back to Top
|
|
